Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

           

123 Street Avenue, City Town, 99999

(123) 555-6789

email@address.com

 

You can set your address, phone number, email and site description in the settings tab.
Link to read me page with more information.

ITW Dynatec Hot Melt Equipment

 

From Glue Machinery Corporation - the largest sales and service company in the USA for 50 years.

1-888-202-2468

 
store-thumb.jpg

          ITW Dynamini

  • Melt on demand
  • Available with piston pump or gear pump
  • Hose lengths: 4, 6, 8, 10, 12, 16, 20 and 24’
  • Handgun with nozzle: $695.00
  • Single Module Automatic Gun: $1098.00 (Multi module guns available)
  • Range of nozzle tips available
  • Swirl Spray equipment available
  • Units are either in stock or will ship within 5-10 business days
N05N10N22
Cost:$3250.00 + hoses & guns$4550.00 + hoses & guns$6700.00 + hoses & guns
Hopper Capacity5kg (10lbs)9kg (20lbs)22kg (48lbs)
Operating Temperature40 to 218°C (100 to 425°F)40 to 218°C (100 to 425°F)40 to 218°C (100 to 425°F)
Melt Rate (per hour)8 kg/hr (17.3lb/hr)8 kg/hr (17.3lb/hr)22.6 kg/hr (50lb/hr)
Pump Rate (per hour).91 kg/min (2lb/min).91 kg/min (2lb/min).91 kg/min (2lb/min)
Gear Pump12:112:112:1
Hose Output Zones222, 6
Max Working Hydraulic Pressure6.8 MPa (1000psi) - Piston Pump6.8 MPa (1000psi) - Piston Pump6.8 MPa (1000psi) - Piston Pump
Temperature Control Stability± 1°C (1°F)± 1°C (1°F)± 1°C (1°F)
Electrical Service Standard100 to 120 VAC 1Phase 50/60 Hz100 to 120 VAC 1Phase 50/60 Hz120 VAC 1Phase 50/60 Hz
Electrical Service Standard--200 to 240 VAC 1Phase 50/60 Hz
Working Viscosity500 - 50,000cps500 - 50,000cps500 - 50,000cps

DimensionsN05N10N22
Height (H)45 cm (17.75 in)65.4cm (25.75 in)61 cm (24 in)
Depth (D)54 cm (21.25 in)54 cm (21.25 in)84 cm (33in)
Width (W)29 cm (11.38 in)29 cm (11.38 in)35.6 cm (14 in)
Weight (empty)27 kg (60lbs)34 kg (76lbs)50 kg (110lbs)

Optional Accessories
Analog pressure gauge
Hose boom
Roll cart
Swirl kit
 

ITW DYNAMELT

  • Available with piston pump or variable speed gear pump
  • Hose lengths are 4, 6, 8, 10, 12, 16, 20 and 24’
  • Handgun with nozzle $695.00
  • Single Module Automatic Gun $1098.00 (Multi module guns available)
  • Range of nozzle tips available
  • Units are either in stock or will ship within 5-10 business days
SR5SR10S22
Cost:Starting at $6390.00Starting at $6890.00$7950.00
Hopper Capacity5kg (10lbs)10kg (22lbs)22kg (48lbs)
Operating Temperature10 to 218°C (50 to 425°F)10 to 218°C (50 to 425°F)10 to 218°C (50 to 425°F)
Melt Rate (per hour)10 kg/hr (23 lb/hr)10 kg/hr (23 lb/hr)23 kg/hr (50 lb/hr)
Melt Rate with Optional Grid(per hour)N/AN/A41 kg/hr (90 lb/hr)
Pump Rate per minute (Piston / 4.5cc Gear) .91kg (2lb) / .38kg (.83lb).91kg (2lb) / .38kg (.83lb).91kg (2lb) / .38kg (.83lb)
Piston Pump Compression Ratios12:112:112:1
Gear Pumps Standard1.5, 3.2, or 4.5cc/rev1.5, 3.2, or 4.5cc/rev1.5, 3.2, or 4.5cc/rev
Hose Output Zones2, 4, or 62, 4, or 62, 4, or 6
Max Working Hydraulic Pressure68bar (1,000psi) - Piston Pump68bar (1,000psi) - Piston Pump68bar (1,000psi) - Piston Pump
Temperature Control Stability± 1°C (1°F)± 1°C (1°F)± 1°C (1°F)
Electrical Service Standard240 VAC 1Phase 50/60 Hz; 240 VAC 3Phase 50/60 Hz240 VAC 1Phase 50/60 Hz; 240 VAC 3Phase 50/60 Hz240 VAC 1Phase 50/60 Hz
Electrical Service Standard380 VAC 3Phase Y 50/60 Hz380 VAC 3Phase Y 50/60 Hz380 VAC 3Phase Y 50/60 Hz
Working Viscosity500 - 50,000cps500 - 50,000cps500 - 50,000cps

DimensionsS05S10S22
Height (H)53.23 cm (20.96 in)66.04 cm (26 in)61 cm (24 in); 73.6 cm (29 in)†
Depth (D)42.67 cm (16.8 in)42.67 cm (16.8 in)84 cm (33 in); 83.2 cm (32.7 in)†
Width (W)65.5 cm (25.79 in)65.5 cm (25.79 in)35.5cm (14 in)
Weight (empty)59 kg (129 lbs)63 kg (138 lbs)50 kg (110lbs)

Optional Accessories
Analog or digital pressure gauge
Tethered pendant controller display
480 VAC transformer
Stack light status indicator
Ethernet module
 
DynaPack.jpg

           ITW Dynapack

  • 20 lb teflon lined reservoir with melt fins and filter.
  • 24 lb per hour melt rate depending on adhesive.
  • High Volume Piston Pump capable of 1.5 lb flow per minute.
  • Nine zone temperature control to include tank, four hoses and guns.
  • Temperature accuracy to one degree F.
  • Durable steel housing.
  • Low cost hoses and guns available.
  • Units are either in stock or will ship within 5-10 business days
DynaPack
Cost$4500.00
Hopper Capacity8.5kg (18.7lbs)
Operating Temperature40°C to 218°C (100°F to 425°F)
Melt Rate (per hour)9.1 kg/hr (20 lb/hr)
Pump Rate .87 kg/min (1.92 lb/min)
Piston Pump Compression Ratios14:1
Hose Output Zones4
Max Working Hydraulic Pressure9.7 MPa (1400psi) - Piston Pump
Temperature Control Stability±1°C (±1°F)
Electrical Service Standard200-240 VAC 1-3ph 50/60 Hz
Electrical Service Standard380 VAC 3Phase wye 50/60 Hz
Working Viscosity500-30,000 cps

DimensionsDynaPackDynapack Mounting Dimensions
Height (H)51 cm (20 in)(A) 5 cm (2 in)
Depth (D)58 cm (22.8 in)(B) 38 cm (15 in)
Width (W)34.3 cm (13.5 in)(C) 25 cm (9.8 in)
Weight (empty)39 kg (86 lbs)-