|
Quattro™ - Adhesive Supply Unit
|
|
|
The ITW Challenger® Quattro Melter adhesive supply unit (ASU) is a computer controlled hot melt supply unit designed on metric standards. It's "all icon" control panel is internationally operator friendly. The hose connections and footprint mountings are compatible with Nordson® models 2300, 3100, 3400, 3500 and ProBlue® Melters.
|
|
|
|
|
Overview
|
|
|
|
|
The Quattro™ ASU uses a microprocessor temperature control to closely control the temperature of hot melt adhesive for a tank and up to four hoses and four heads. Temperature setpoints are operator selected for up to nine zones and the system automatically provides warnings for operator errors and system malfunctions.
The Quattro™ ASU uses an extremely dependable, constant-pressure piston pump. The air operated piston insures a high pressure adhesive output from a low pressure, compressed air input.
- Microprocessor temperature control closely monitors temperature of hot melt tank and hoses.
- Simple, user friendly icon-driven controls.
- Easy drop-in replacement for Nordson® melters.
- Temperature stand-by settings to help reduced adhesive char when unit is active.
- Easily removable access covers completely expose all components for easy maintenance.
*Note: Nordson® is a registered trademark of Nordson Corporation. ProBlue® is a registered trademark of Nordson Corporation.
|
|
|
|
Technical Specifications
|
|
| System |
Quattro™
|
|
Hopper Capacity
|
8.5kg (18.7lbs)
|
|
Operating Temperature
|
40°C to 218°C (100°F to 425°F)
|
|
Melt Rate (per hour)*
|
9.1 kg/hr (20 lb/hr)
|
|
Pump Rate
|
.87 kg/min (1.92 lb/min)
|
|
Piston Pump Compression Ratios
|
14:1
|
|
Hose Output Zones
|
4
|
|
Maximum Working Hydraulic Pressure
|
9.7 MPa (1400psi) - Piston Pump
|
|
Temperature Control Stability
|
±1°C (±1°F)
|
|
Electrical Service Standard
|
200-240 VAC 1-3ph 50/60 Hz
|
|
Electrical Service Standard
|
380 VAC 3Phase wye 50/60 Hz
|
|
Working Viscosity
|
500-30,000 cps
|
|
Dimensions
|
Quattro™
|
Quattro™ Mounting Dimensions
|
| Height (H) |
51 cm (20 in)
|
(A) 5 cm (2 in)
|
| Depth (D) |
58 cm (22.8 in)
|
(B) 38 cm (15 in)
|
| Width (W) |
34.3 cm (13.5 in)
|
(C) 25 cm (9.8 in)
|
| Weight (empty) |
39 kg (86 lbs)
|
-
|
|
|
|
|
The Dynatec Difference
|
|
|
Quattro™ Melter - The Dynatec® Difference
- Computer-controlled hot melt supply unit designed on metric standards.
- Flexible tempreature programming features help increase adhesive life.
- Extremely dependable piston pump.
- Teflon coated tank accepts hot melt adhesive in all popular forms including pellets, slugs and blocks.
|
Need more information on our products? Send an e-mail to
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
requesting more information about a specific product(s) and/or service, or use the contact/quote form.
|
Website © 2012 Glue Machinery Corporation™ - 1-888-202-2468
ITW Dynatec® & ITW/Challenger® are registered trademarks of the Illinois Tool Works Corporation.
