|
Dynamini™ Series - Adhesive Supply Unit
|
|
|
The DYNAMINI hot melt adhesive supply unit is a computer-controlled hot-melt unit. Its easy-to-use, all-icon control panel is internationally operator friendly.
The Dynamini features ITW Dynatec's patented no-char Melt-On-Demand System.
|
|
|
|
|
Overview
|
|
|
|
|
DYNAMINI™ hot melt adhesive supply units provide exceptional value in a small hot melt unit which has been designed for optimal performance, reliability and simplified daily operation. The patented melt-on-demand hopper with seven year warranty standard, virtually eliminates adhesive degradation.
|
|
The Dynamini System provides accurate, proportionate temperature control for the hopper, hoses and applicators.
Sequential start-up delays may be programmed for turn-on of the hoses and heads.
The temperature control can interlock the parent machine with preselected adhesive temperatures so that production automatically begins when adhesive temperatures are correct for the application.
All system temperature values can easily and quicly be programmed.
|
- Melt-On-Demand Hopper Grid extends adhesive life and performance.
- 7 year Melt-On-Demand hopper warranty.
- Self-diagnostic P.I.D Temperature Controller with platinum sensor accuracy.
- 110/120V and 200/240V configurations fitted with either a piston or gear pump.
- Easily removable access covers completely expose all components for easy maintenance.
|
|
|
|
Technical Specifications
|
|
|
*Melt & pump rates dependant on adhesive type.
| System | N05 | N10 | N22 |
| Hopper Capacity |
5kg (10lbs) |
9kg (20lbs) |
22kg (48lbs) |
| Operating Temperature |
40 to 218°C (100 to 425°F) |
40 to 218°C (100 to 425°F) |
40 to 218°C (100 to 425°F) |
| Melt Rate (per hour)* |
8 kg/hr (17.3lb/hr) |
8 kg/hr (17.3lb/hr) |
22.6 kg/hr (50lb/hr) |
| Pump Rate (per hour)* |
.91 kg/min (2lb/min) |
.91 kg/min (2lb/min) |
.91 kg/min (2lb/min) |
| Piston Pump Compression Ratios |
12:1 |
12:1 |
12:1 |
| Gear Pump |
1.5, 3.2, 4.5, 5.5, & 10cc |
1.5, 3.2, 4.5, 5.5, & 10cc |
1.5, 3.2, 4.5, 5.5, & 10cc |
| Hose Output Zones |
2 |
2 |
2, 6 |
| Max Working Hydraulic Pressure |
6.8 MPa (1000psi) - Piston Pump |
6.8 MPa (1000psi) - Piston Pump |
6.8 MPa (1000psi) - Piston Pump |
| Temperature Control Stability |
± 1°C (1°F) |
± 1°C (1°F) |
± 1°C (1°F) |
| Electrical Service Standard |
100 to 120 VAC 1Phase 50/60 Hz |
100 to 120 VAC 1Phase 50/60 Hz |
120 VAC 1Phase 50/60 Hz |
| Electrical Service Standard |
- |
- |
200 to 240 VAC 1Phase 50/60 Hz |
| Working Viscosity |
500 - 50,000cps |
500 - 50,000cps |
500 - 50,000cps |
| Dimensions | N05 | N10 | N22 |
| Height (H) |
45 cm (17.75 in) |
65.4cm (25.75 in) |
61 cm (24 in) |
| Depth (D) |
54 cm (21.25 in) |
54 cm (21.25 in) |
84 cm (33in) |
| Width (W) |
29 cm (11.38 in) |
29 cm (11.38 in) |
35.6 cm (14 in) |
| Weight (empty) |
50 kg (110lbs) |
50 kg (110lbs) |
50 kg (110lbs) |
| Optional Accessories |
| Analog pressure gauge |
| Hose boom |
| Roll cart |
| Swirl kit |
|
|
|
|
The Dynatec Difference
|
|
|
Melt-on-Demand Hopper
Most suppliers will agree that adhesive degradation is the number one cause of downtime on hot melt equipment. To address this problem, ITW Dynatec has patented a "Melt-on-Demand" system. ITW Dynatec's vertical unheated hoppers only melt the amount of adhesive required by the application. Most of the hot melt adhesive in the hopper remains at a much lower temperature, perhaps even solid state.
The added benefits of melting only the adhesive required are quicker start-ups, reduced energy costs, better viscosity control, and reduced fumes.
- Less Energy Consumption - The Dynamelt uses less energy than conventional equipment by heating only the adhesive in the lower portion of the hopper.
- Operator Safety - The adhesive in the top of the hopper remains in a cooler, often solid state and reduces the operator's potential for burns. Also, adhesive splash-back when filling the hopper is reduced.
- Faster System-Ready - The Dynamini Series does not have to melt all of the adhesive, so it is ready for operation much faster than conventional equipment.
- Adhesive Degradation is Greatly Reduced - By only melting the required amount of adhesive, the common problem of charring is minimized. When adhesive is replenished using conventional equipment, the solid, more dense adhesive falls to the bottom of the hopper causing older glue to move to the top of the hopper. By doing this, adhesive is subject to longer heat exposure which is one of the main causes of char. This does not happen with Melt-On-Demand. The molten glue at the bottom of the hopper is used first. Another important benefit is that all of the heat is applied at the bottom of the hopper using Melt-On-Demand, so char build-up on the side walls of the hopper is minimized.
- Reduced Maintenance - With Melt-On-Demand, equipment maintenance will be reduced. Frequency of periodic hopper draining to purge char is greatly reduced, and filter and nozzle clogging will be reduced as well.
- Seven-Year Hopper Warranty
|
Need more information on our products? Send an e-mail to
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
requesting more information about a specific product(s) and/or service, or use the contact/quote form.
|
Website © 2012 Glue Machinery Corporation™ - 1-888-202-2468
ITW Dynatec® & ITW/Challenger® are registered trademarks of the Illinois Tool Works Corporation.
Adhesive Supply Units 
