|
Operations Overview:
A solidified drum of adhesive is loaded into the Convert-a-Drum. Pneumatic cylinders close the oven door and lid. Six heaters, which encircle the oven, heat the air surrounding the drum up to a temperature of 400ºF. As the outside edges of the adhesive in the drum melts, the slug beings to slide downward until it finally drops out of the drum.
As it enters the hot melt unit's hopper, a rocker switch detects the presence of the slug. At thirty inches below the lid, the slug of adhesive passes through a slice/melter containing another eight heaters (8,000 watts) which speed the melt down process. After being sliced, the slug melts down completely in the premelt hopper section of the hot melt unit.
Once the slug travels past the lower limit of the rocker switch, the switch activates the flasher/horn, indicating that the oven is empty, and automatically turns off the Convert-A-Drum's oven heaters. The flashing light indicates that the system is ready for another drum of adhesive. The Convert-a-Drum's oven heaters remain off until the system is loaded with another drum of adhesive and the level controller calls for more adhesive.
Staged melting minimizes the adhesive exposure to elevated temperatures and virtually eliminates char.
A full drum can be staged and ready to start the melting process when level sensors are activated.
- 5 Stage Melt-On-Demand system.
- Allen Bradley SLC-504 Control Package.
- Up to 6 gear-pumps with 1hp AC brushless motors.
- Pump pressure relief system.
- No drum change downtime.
- 800 lb Teflon hard anodized hopper.
- Dual basket type filtration
- Standard 30cc per revolution gear pump.
- Up to 425 lb/hr delivery of hot melt PSA.
|
