Print E-mail

 
Adhesive Pattern Controllers

  

The Pattern Controller is one component of an adhesive application system consisting of a hot melt unit (ASU), cold glue pressure vessel, or cold glue pump, adhesive hoses and applicator heads.  The controller can be used for hot melt or cold glue application.  The pattern controller activates solenoids for the applicator heads in order to create individual adhesive patterns.  Click on the links below to learn more about the full line of ITW Dynatec® Hot Melt Pattern Controllers.

  

DY2008 Pattern Controller

DY2008 Pattern Controller by ITW Dynatec®
Quick Specs:

  • 4 to 128 Channels
  • 16 Patterns per Channel
  • Trigger Inputs for Each Channel.
  • 4 Pressure Outputs
  • 4 Scalable Machine Speed Inputs
  • 55 VDC or 170 VDC Over-Excitation
  • Memory for 60 Programs
  • Modes Include Standard, Continuous and Random Length

DY2002 Pattern Controller
DY2002 Pattern Controller by ITW Dynatec®


Quick Specs:

  • 2 Channels
  • 4 Patterns per Channel
  • Memory for 12 Programs
  • Distance-based, Time-based and Drive Modes
  • Integrated Palletization Mode
  • Built-in Production Counters
  • Machine speeds to 600 mm/min (200fpm) @ 0.5mm (.02")

DPC-2 Pattern Controller


DPC-2 Pattern Controller by ITW Dynatec®


Quick Specs:

  • Hot Melt or Cold Glue System Compatible
  • Distance Based 2 Channel Controller
  • "On-the-Fly" Program Adjustments
  • 4 Glue Pattern Events per Channel
  • 4 Program Memory Retention
  • Keyed Lock Programming Security
  • Glue Applicator Purge Control
  • Automatic Pressure Control Outputs
  • Power Off Program Retention
  • IP-54 Enclosure

Click Here for more information on the DY2008 Pattern Controller by ITW Dynatec®.

Click Here for more information on the DY2002 Pattern Controller by ITW Dynatec®.

Click Here for more information on the DPC-2 Pattern Controller by ITW Dynatec®.

 

 

 

 

 

 

TPC-2 Pattern Controller

TPC-2 Pattern Controller by ITW Dynatec®


Quick Specs:

  • Hot Melt or Cold Glue System Compatible
  • Time Based 2 Channel Controller
  • "On-the-Fly" Program Adjustments
  • 4 Glue Pattern Events per Channel
  • Ability to Retain 4 Programs
  • Keyed Lock Programming Security
  • Glue Applicator Purge Control
  • Palletizing Application Control Function
  • Power Off Program Retention
  • IP-54 Enclosure

 

 

Click Here for more information on the TPC-2 Pattern Controller by ITW Dynatec®.

 

 

 

 

Need more information on our products?  Send an e-mail to This e-mail address is being protected from spambots. You need JavaScript enabled to view it requesting more information about a specific product(s) and/or service, or use the contact/quote form.

 
 
Website © 2012 Glue Machinery Corporation™ - 1-888-202-2468
ITW Dynatec® & ITW/Challenger® are registered trademarks of the Illinois Tool Works Corporation.