ADS1™ - Adhesive Delivery System

The ADS1 DynaFill™ Automatically replenishes adhesive to the desired level in hot melt equipment.  A low level indicator sends a signal to the DynaFill™ that adhesive is needed.  They DynaFill™ then activates a positive pressure suction that draws the adhesive and deposits it into the hot melt unit.

The ADS1 will easily integrate with competitive equipment configurations.  Out of the box installation with drop-in adhesive tank connection.

Overview

Hot melt adhesive supply units (ASUs) require frequent adhesive re-filling.

If the operator does not refill the hot melt supply unit often enough, there can be insufficient time to melt and condition the adhesive.  This results in equipment down time and employees waiting until the hopper temperature returns to setpoint.

Installation of a HF Hopper feeder system reduces all of the above problems.  The result is lower repair costs and higher production rates.

The ADS-1 DynaFill™ utilizes an air venturi-activated suction to pick up the solid hot melt adhesive from a bulk container and convey it by air pressure to the hopper.

• Easily integrated into most standard ITW Dynatec® and competitive hot melt units.
• Minimizes adhesive contamination for increased uptime.
• On-Demand adhesive replenishment saves operator time and prevents thermal shock to the adhesive.
• Automatically feeds hot melt units up to 20 feet vertically and 100 feet horizontally.

Technical Specifications

The Dynatec Difference

 
Energy Efficiency

The DynaFill™ consumes only 20 SCFM at 50 psi during adhesive feeding, saving valuable manufacturing resources.  The ADS1 permits automatic adhesive feed up to 22 feet vertically and 100 feet horizontally.